Neonatal Warming System Manufacturer,Supplier and Exporter in India

Neonatal Warming System

Product Code : EL-MD-10577
Science lab Equipment india is a leading Neonatal Warming System Manufacturer,and suppliers in India, Neonatal Warming System Manufacturer,and suppliers in South Africa, Neonatal Warming System Algeria (Algiers), Neonatal Warming System Angola (Luanda), Neonatal Warming System Argentina (Buenos Aires), Neonatal Warming System Armenia (Yerevan), Neonatal Warming System Australia (Canberra), Neonatal Warming System Austria (Vienna), Bahrain (Manama), Bangladesh (Dhaka), Bhutan (Thimphu), Bolivia (Sucre), Botswana (Gaborone), Brazil (Brasília), Brunei (Bandar Seri Begawan), Montenegro (Podgorica), Morocco (Rabat), Mozambique (Maputo), Myanmar (Naypyidaw), Namibia (Windhoek), Nepal (Kathmandu), New Zealand (Wellington), Nigeria (Abuja), Oman (Muscat), Palestine (Ramallah), Panama (Panama City), Papua New Guinea (Port Moresby), Paraguay (Asunción), Peru (Lima), Philippines (Manila)¸ Portugal (Lisbon), Qatar (Doha), Rwanda (Kigali), Saudi Arabia (Riyadh), Senegal (Dakar), Serbia (Belgrade), Sierra Leone (Freetown), Slovakia (Bratislava), South Africa (Cape Town) (Pretoria) (Bloemfontein), South Sudan (Juba), Spain (Madrid), Sri Lanka (Sri Jayawardenepura Kotte) (Colombo), Sudan (Khartoum), Syria (Damascus), Tanzania (Dodoma), Thailand (Bangkok), Togo (Lomé), Tonga (Nuku'alofa), Trinidad and Tobago (Port of Spain), Tunisia (Tunis), Turkey (Ankara), Turkmenistan (Ashgabat), Uganda (Kampala), United Arab Emirates (Abu Dhabi), United Kingdom (London), United States (Washington, D.C.).

The Warmer is used to assist premature babies maintaining the appropriate body temperature.
System consists of a control unit, a heating pad, a water mattress and an inflatable BabyNest frame.
Electronic servo temperature control.
Automatic warm-up to 37°C, time to stabilize approx. 20 min.
Large color display shows operational status, with set and measured values.
Integrity testing of all system parameters every 5 minutes.
Flexible waterproof low voltage heating pad slides under mattress.
Pre-set is 37°C, Adjustable from 35 to 38°C in increments of 0,1°C.
Accuracy temperature control of heating pad is ±0.1°C.
Reusable BabyNest frame keeps baby in place.
External battery connection point at the underside of the control unit.
Strong soft plastic BabyNest mattress fills with water (about 36°C), approx. 4.5 L.
Over Temperature Alarm: at a water temperature of 39.5 ±1 °C. Warming capacity: About 4-5°C per hour. 
Cotton cover frame can be tightly secured around the water mattress and heating pad.
The water mattress will cool 1°C per hour which means that one has about 2 hours to restore power.
Perform self-testing of all functions and internal safety circuit by switching the control unite.
Fit with connector for standard YSI skin temperature sensor.

Control Unit:
Auditory Alarm: 55 dB sound level.
Main Power/frequency: 110-240 V AC or 110-120 AC. 50/60 Hz.
Battery power: 24 V DC, 12 V DC (with limited warming capacity)
Temperatures available: 35 to 38°C increments of 0.1°C.
Over temperature alarm at water Temperature of 39.5 ±1 °C.
Internal Battery: Alkaline, 1.5V size LR6 (AA) (only for power failure alarm.

Heating Pad:
Power requirements: 110-240 V AC or 110-120 V AC.
Frequency 50 or 60 Hz,
Battery 12 or 24 V.
Voltage: 24-volt DC from control Unit BW-50 007 when powering with mains power or 24V DC when powering from 12-24V battery source.
Power consumption 50 Watt.
Material: PVC.
Material: Medical Grade PVC.

Baby Nest:
Material: Cover, high quality cotton and polyester.
Washing: Recommended temperature 60°C, can tolerate 90°C but might shorten lifetime.


Office Address

[email protected]

Follow Us