External Defibrillator for Adult and Paediatric Patients Manufacturer,Supplier and Exporter in India

External Defibrillator for Adult and Paediatric Patients

Product Code : EL-MD-10578
Science Lab Equipment India is a leading External Defibrillator for Adult and Paediatric Patients Manufacturer,and suppliers in Africa, External Defibrillator for Adult and Paediatric Patients Manufacturer,and suppliers in Nigeria,External Defibrillator for Adult and Paediatric Patients Suppliers in Ethiopia,External Defibrillator for Adult and Paediatric Patients in Supplier Kenya, Egypt, South Africa, Tanzania,Algeria, Uganda, Sudan, Morocco, Ghana, Mozambique, Ivory Coast, Madagascar, Angola, Cameroon, Niger, Burkina Faso, Mali, Malawi, Zambia, Senegal, Zimbabwe, Chad, Guinea, Tunisia, Rwanda, South Sudan, Benin, Somalia, Burundi, Togo, Libya, Sierra Leone

Defibrillator features:
Manual and synchronized defibrillation
Bi-phasic energy waveform
Adjustable energy output, by steps
Energy output accuracy ± 15 %
Patient resistance 30 – 175 Ohm
Adult and paediatric energy settings
charge time to maximum energy < 10 s

ECG monitor:
detection through pads or dedicated ECG cable
ECG waveform and analysis, selectable visualization modes
3-leads ECG cable
ECG gain 2.5, 5, 10 and 20 mm/mV 
protection against defibrillation discharges
adjustable ECG print modes and settings 

Printer:
built-in 3-channel thermal printer
print of ECG curves and analysis, events, settings and alarms
paper speed 25 mm/s 
paper width 58 or 72 mm
Internal safety discharge feature 
Compatibility with additional modes and monitoring
Internal storage for ECG, events and parameters
Data/USB communication interface
Integrated carry handle
Splash and shock resistant

Power requirements 110 – 220 V / 50 – 60 Hz
Power consumption 200 W
External defibrillator with ECG monitor
Integrated battery charger and transformer
Removable rechargeable battery
Battery autonomy > 100 shocks at 200 J or 3.5 h monitoring
Supplied with adult and paediatric pads/adapters
Non-directional pads, suitable for bi-phasic impulse waveform
Integrated control panel with all parameters and controls
Display, backlit flat panel, 5 – 8 inch diagonal depending
Load compensation, energy level automatic adjustment to the patient impedance
Visualisation of defibrillation mode, energy, ready/charging state, ECG curves and heart rate, date/time
Audio/visual alarms for pads connection, mains/battery power supply status, paper and printer status, system errors
Automatic and manual self-test, continuous check of pads and electrodes connection
Automatic switch to battery in case of power failure, automatic recharge on connection to mains

Office Address

Works: 89 Bharat Coal Compound ,Kale Marg , Bail Bazar ,
Kurla West, Mumbai, Maharashtra 400070

[email protected]

+91-90259-88144

Follow Us