He*Tap, for Plastic Bucket Manufacturer,Supplier and Exporter in India
Product Code : EL-WDF-10808
Quick Answer: The He*Tap, for Plastic Bucket is a plastic tap made to be fitted into a 14–20 litre plastic water storage bucket. It has an inside diameter of about 3/4 inch and opens or closes with a 180° turn of the handle.
Last updated: October 2026
Key Features
- Plastic tap for 14–20 litre plastic buckets; the bucket itself is not included
- Inside diameter about 3/4 inch, and not less than 1/2 inch
- Threaded part about 2 cm long and about 1 inch (25 mm) outside diameter
- Fixed from outside the bucket and held by a locking nut screwed on from the inside
- Softer washers supplied to keep the joint leak tight
- Handle turns 180° to open and back to close
Technical Specifications
| Specification | Value |
|---|---|
| Suits | Plastic bucket, 14–20 litres (bucket not included) |
| Inside diameter | About 3/4 inch (not less than 1/2 inch) |
| Threaded part | About 2 cm long, about 1 inch (25 mm) outside diameter |
| Fixing | Locking nut from inside the bucket, with washers |
| Operation | 180° turn of the handle to open and close |
About This Product
A bucket tap turns an ordinary plastic bucket into a simple dispenser for stored water. A hole is drilled in the bucket wall to match the tap thread, the tap is pushed through from outside and the nut is tightened from inside over the washers. The short thread leaves room for both washer and nut. Laboratories and colleges in Eritrea, Belize, Georgia, Benin and Sri Lanka can buy the He*Tap, for Plastic Bucket through an export order.
Frequently Asked Questions
Is a bucket supplied with the He*Tap, for Plastic Bucket?
No. Only the tap is supplied. It is meant for a plastic bucket of 14–20 litres, with a hole drilled to match the tap thread.
How is the He*Tap fixed to the bucket?
The tap goes through the drilled hole from the outside of the bucket and is held by a locking nut screwed on from the inside. Washers are supplied to seal the joint.
Related: Water Distribution Fittings and Bottle Tap & Hose Pipe for PP Sink, for Pharma & Lab.
For a quotation on the He*Tap, for Plastic Bucket, contact Educational Instrument.
.jpg)
.jpg)
.jpg)
.png)
.png)