Elbow, 90°, Adaptor Manufacturer,Supplier and Exporter in India
Product Code : EL-WDF-10788
Quick Answer: The Elbow, 90°, Adaptor is a polypropylene 90° elbow that joins a 110 mm OD HDPE pipe, by compression fitting, to a 4 inch galvanised iron pipe on a female thread.
Last updated: October 2026
Key Features
- 90° elbow in reinforced, UV-stabilised polypropylene
- Compression fitting on the HDPE end
- Female thread on the G.I. end
- Connects 110 mm OD HDPE pipe to 4 inch nominal G.I. pipe
- Pressure rating 10 bar at 20 °C; temperature range 0 to 50 °C
- For drinking water lines
Technical Specifications
| Specification | Value |
|---|---|
| Angle | 90° |
| Material | Reinforced polypropylene, UV stabilised |
| HDPE end | Compression fitting, 110 mm OD |
| G.I. end | Female thread, 4 inch nominal |
| Pressure rating | 10 bar at 20 °C |
| Temperature range | 0 to 50 °C |
| Use | Drinking water |
About This Product
A transition elbow like this is used where a buried HDPE water main turns and connects to galvanised iron pipework, such as at a tap stand, a tank outlet or a pump discharge. The Elbow, 90°, Adaptor can be supplied on export terms to Cameroon, Barbados, Zambia, Cyprus and New Zealand.
Frequently Asked Questions
Which pipes does the Elbow, 90°, Adaptor connect?
It connects an HDPE pipe of 110 mm outside diameter, by compression fitting, to a galvanised iron pipe of 4 inch nominal diameter on a female thread.
Related: Water Distribution Fittings, Straight Adaptor and Elbow, 90°, equal.
For a quotation on the Elbow, 90°, Adaptor, contact Educational Instrument.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
