Bend 90°, equal Manufacturer,Supplier and Exporter in India
Product Code : EL-WDF-10781
Quick Answer: The Bend 90°, equal is a 4 inch right-angle bend for galvanised iron water pipes, female threaded at both ends. Made of hot-dip galvanised malleable cast iron, it is rated for 14 bar (200 lb/sq inch).
Last updated: October 2026
Key Features
- 90° change of direction with equal ends
- 4 inch nominal diameter
- Internal female thread on both ends
- Malleable cast iron, threaded after hot-dip galvanising
- Rated for 14 bar (200 lb/sq inch)
Technical Specifications
| Specification | Value |
|---|---|
| Angle | 90°, equal |
| Nominal diameter | 4 inch |
| Thread | Internal female, both ends |
| Material | Malleable cast iron, hot-dip galvanised |
| Pressure rating | 14 bar (200 lb/sq inch) |
About This Product
A bend turns a pipe run through a right angle with a gentler sweep than a short elbow. In a 4 inch galvanised main it is used where the line follows a wall, corner or trench. Schools, colleges and institutes in Madagascar, Bangladesh, Antigua and Barbuda, Guinea and Mexico can order the Bend 90°, equal from Educational Instrument.
Frequently Asked Questions
What size pipe does this 90° bend fit?
It has a nominal diameter of 4 inch with internal female threads on both ends for galvanised iron water pipe.
Related: Water Distribution Fittings, Elbow, 90°, equal, Socket, equal, for galvanized and Cross, equal, for galvanized iron water pipes.
For a quotation on the Bend 90°, equal, contact Educational Instrument.
.jpg)
.png)
