Cap, for Galvanized Iron Manufacturer,Supplier and Exporter in India
Product Code : EL-WDF-10779
Quick Answer: The Cap, for Galvanized Iron closes the end of a 1/2 inch galvanised iron water pipe with an internal female parallel thread. It is malleable cast iron, hot-dip galvanised and threaded after galvanising, rated for 14 bar.
Last updated: October 2026
Key Features
- Fits 1/2 inch nominal diameter galvanised iron pipe
- Internal female parallel thread
- Malleable cast iron body
- Hot-dip galvanised, then threaded after galvanising
- Pressure rating 14 bar (200 lb/sq inch)
Technical Specifications
| Specification | Value |
|---|---|
| Fitting | End cap, female threaded |
| Nominal diameter | 1/2 inch |
| Thread | Internal female parallel |
| Material | Malleable cast iron, hot-dip galvanised |
| Pressure rating | 14 bar (200 lb/sq inch) |
About This Product
An end cap seals a male-threaded pipe end, for example at a future branch point or at the end of a test section. It screws directly onto the pipe without other parts. Educational Instrument can arrange export supply of the Cap, for Galvanized Iron to Kazakhstan, Laos, Afghanistan, Syria and Lithuania.
Frequently Asked Questions
Is the cap threaded before or after galvanising?
The malleable cast iron cap is hot-dip galvanised first and threaded after galvanising.
Related: Water Distribution Fittings, Plug, for Galvanized, Nipple, for Galvanized and Socket, equal, for galvanized.
For a quotation on the Cap, for Galvanized Iron, contact Educational Instrument.
