Subsonic Wind Tunnel Manufacturer,Supplier and Exporter in India
Product Code : EL-AEFT-11250
Quick Answer: The Subsonic Wind Tunnel is an open-circuit suction wind tunnel for studying aerodynamics, built on a metal frame with lockable castors. Air is drawn through an effuser, a clear square working section, a grill and a diffuser by a variable speed axial fan, then leaves through a silencer.
Last updated: October 2026
Key Features
- Open-circuit suction layout: effuser, working section, grill, diffuser, variable speed axial fan and silencer unit
- Square working section with a clear roof, sides and floor; the sides are removable
- Grill protects the fan from damage by loose objects
- Floor and each side panel have a position to support optional wind tunnel models; a protractor and model holder are supplied to set the model angle
- Pitot-static tube and traversing Pitot tube fit upstream and downstream of models and connect to the manometers of the instrumentation unit
- Control and instrumentation unit with manometers and electrical outlets for other optional instruments
Technical Specifications
| Specification | Value |
|---|---|
| Type | Open-circuit suction wind tunnel |
| Working section | Square, with clear roof, sides and floor |
| Fan | Variable speed axial fan |
| Frame | Metal, with lockable castors |
| Supplied with | Protractor and model holder |
| Control unit | Manometers and electrical outlets for optional instruments |
About This Product
A suction tunnel like this is used for undergraduate aerodynamics study and research projects. A model is set at a chosen angle in the working section while the Pitot tubes upstream and downstream feed pressure readings to the manometers, so students can study how air flows over and around it.
Frequently Asked Questions
Are models supplied with the Subsonic Wind Tunnel?
No. Wind tunnel models are optional. The tunnel comes with a protractor and a model holder, and its floor and side panels have positions to support the models.
How is pressure measured in the Subsonic Wind Tunnel?
A Pitot-static tube and a traversing Pitot tube fit on the working section, upstream and downstream of any model, and connect to the manometers of the control and instrumentation unit.
Related: Aerodynamics Equipment for Training, Bench Top Wind Tunnel, Modular Air Flow Bench and Data Acquisition Systems.
For a quotation on the Subsonic Wind Tunnel, contact Educational Instrument.
